成膜剂
Alodine 407（漕液六价铬，成膜三价铬钝化）
·适用于铝材和铝合金的化学氧化处理；·处理后工件表面呈无色至蓝绿色；·此氧化膜增强了工件的耐蚀性以及与漆膜的结合力。
Alodine 1200S（三价，六价铬黄色钝化）
·一种粉剂产品,用于处理铝，在其表面形成一层从浅金色到棕黄色的转化膜；·这一涂层有极好的防腐蚀性能，而且能保证外面的涂料和塑料涂层有极好的粘着力；· Alodine 1200S用于浸渍处理。
Alodine C 6100D（六价铬黄色钝化）
·工作液主要成分为铬酸盐,适用于铝材和锌材的化学氧化处理；·处理后工件表面的氧化膜呈黄色，膜重0.1-1g/m2；·此氧化膜能增强工件的耐蚀性以及与漆膜的结合力。
Alodine 1500（六价铬无色钝化）
·单组分产品，适用于铝材及铝合金的铬化处理，喷浸佳宜；·经处理后的工件基本保持原金属颜色；·本产品获美军认可用于飞机的表面处理
Aldoine 5200（无铬钝化，可用于滚压）
·Aldoine 5200是一种用于处理铝及其合金的无铬产品，喷浸皆宜；·本工艺能提供一种优良的漆底钝化膜。处理后工件表面呈无色。
Aldoine 4831（无铬钝化）
Aldoine 4831是一种用于处理铝及其合金双组分无铬产品，喷浸皆宜；·本工艺能提供一种优良的漆底钝化膜。处理后工件表面呈无色。
Bonderite 1402W（用于滚压）
Bonderite 1402W无 清 洗 转 化 涂 层为铝、镀锌或冷轧卷材转化涂层而设计的。这一处理工艺一般是用辊筒涂覆化学品。本工艺单组份的处理液能产生一层均匀的、金属的涂层，其能改善油漆的附着力、耐蚀性和提高面漆的耐久性。
铝材出光 
Deoxidizer 150-40 ·不含氟的酸性液体，适用于铝材和铝合金碱洗后的出光处理。 
Deoxidizer 395H ·除去碱蚀后铝材表面的斑
清洗剂
P3-SAXIN
P3-SAXIN是一种弱碱性的，硅酸盐缓冲的高效脱脂、清洗剂。含高比例的聚磷酸盐和加热时仅产生轻微泡沫的湿润剂。本产品呈粉末状，具有良好的软水性和降低表面张力的性质。
P3-ALMECO 18
P3-almeco18主要用于铝材表面的清洗和脱脂。产品的组成对进一步的工艺没有副作用。例：粘和、焊接、浸蚀、阳极氧化、着色，或封闭工艺、建筑业、飞机制造业、汽车配件、家用器具中铝合金的脱脂、清除残质也可用P3-almeco 18。P3-almeco 18对铝及其合金的浸蚀程度轻微, 对阳极氧化处理的表面也无损伤，P3-almeco 18中没有铬酸盐的成分，冲洗也很容易。P3-almeco 18中的湿润剂不会乳化油。油质会分离，这样也容易在液体表面去除这种油质，并给废水处理带来方便。如果对油质进行乳化，我们建议用P3-almeco 14,P3-almeco 18会产生一种微量泡沫, 若对泡沫不理想, 可选用P3-almeco 36。
P3-ALOMECO 57 （碱蚀剂 ）
P3-almeco 57是一种强碱性粉末产品。用于铝材和其合金的清洗和浸蚀。它没有湿 润剂，硅酸盐的成分，易溶于水。它有防止液体槽和加热管上Al(OH)3垢结块的作用。在浸蚀过程中不会产生氨烟。
Parco Cleaner 338L
是专为制备铝、钢，热浸镀锌和电镀锌钢板表面而设计的，以喷淋方式处理板材和带材。这种强碱性的清洗剂特别被推荐用于 BONDERITE 工艺处理之前的清洗
ALUETCH
酸性清洗剂Aluetch 是为清洗合金而特别配制的一种液体化学品，通常用于浸渍工艺。它在清洗表面油脂的同时还可清除表面较轻的氧化皮。Aluetch 的研制是为了迎合不需对合金进行深度腐蚀的工艺。特别适用于对合金进行铬化处理以及喷涂处理之前。Aluetch 含有表面活性剂，因此没有必要进行通常的除油处理。经Aluetch处理过的表面可保持铝的原有光泽。
RIDOLINE 124
Ridoline 124是一种双组份的酸性液体清洁剂，它主要用于铝合金材料钝化前的脱脂处理，可以清除铝材表面的油污和氧化物。
P3-neutrapon 5088（可用铸铝清洗工艺）
中性清洗剂，清洗和钝化钢、铸铁、锌、镁和铝。适合于浸渍，喷淋和超声波清洗工艺
Ridoline 336建筑业中铝型材、板材、汽车业装饰件和家用铝制品的脱脂。
RIDOLINE  53S （铸铝清洗工艺）
碱性粉状清洗剂,含硅酸盐,适用于清洗铝，铜，锌，镉.本产品在正常使
用条件下不侵蚀工件,而且容易漂洗。施用方法喷浸皆宜
RIDOLINE  212（铸铝清洗工艺）
Ridoline 212是一种专为铝及铝合金设计的，除去其表面油污和氧化薄膜的，浓缩型，不含硅酸盐的弱碱性液体清洗剂。
RIDOLINE  135CMU （铸铝清洗工艺）
Ridoline 135CMU是一种液态酸性产品, 用于铝材清洗和出光，喷浸均可，特别推荐用于铸铝及锌合金，其对材质的腐蚀较小，但长时间接触也会因腐蚀而使工件失色


















































































The information provided in this Technical Data Sheet (TDS)
including the recommendations for use and application of the
product are based on our knowledge and experience of the
product as at the date of this TDS. The product can have a
variety of different applications as well as differing
application and working conditions in your environment that
are beyond our control. Henkel is, therefore, not liable for the
suitability of our product for the production processes and
conditions in respect of which you use them, as well as the
intended applications and results. We strongly recommend
that you carry out your own prior trials to confirm such
suitability of our product.

TDSBONDERITE M-NT 811, March-2021
Any liability in respect of the information in the Technical
Data Sheet or any other written or oral recommendation(s)
regarding the concerned product is excluded, except if
otherwise explicitly agreed and except in relation to death or
personal injury caused by our negligence and any liability
under any applicable mandatory product liability law.
In case products are delivered by Henkel Belgium NV,
Henkel Electronic Materials NV, Henkel Nederland BV,
Henkel Technologies France SAS and Henkel France SA
please additionally note the following:
In case Henkel would be nevertheless held liable, on
whatever legal ground, Henkel’s liability will in no event
exceed the amount of the concerned delivery.
In case products are delivered by Henkel Colombiana,
S.A.S. the following disclaimer is applicable:
The information provided in this Technical Data Sheet (TDS)
including the recommendations for use and application of the
product are based on our knowledge and experience of the
product as at the date of this TDS. Henkel is not liable for the
suitability of our product for the production processes and
conditions in respect of which you use them, as well as the
intended applications and results. We strongly recommend
that you carry out your own prior trials to confirm such
suitability of our product.
Any liability in respect of the information in the Technical
Data Sheet or any other written or oral recommendation(s)
regarding the concerned product is excluded, except if
otherwise explicitly agreed and except in relation to death or
personal injury caused by our negligence and any liability
under any applicable mandatory product liability law.
In case products are delivered by Henkel Corporation or
Henkel Canada, Inc.the following disclaimer is
applicable:
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. It is the user's responsibility to
determine suitability for the user's purpose of any production
methods mentioned herein and to adopt such precautions as
may be advisable for the protection of property and of
persons against any hazards that may be involved in the
handling and use thereof. In light of the foregoing, Henkel
Corporation specifically disclaims all warranties
expressed or implied, including warranties of
merchantability or fitness for a particular purpose,
arising from sale or use of Henkel Corporation’s
products. Henkel Corporation specifically disclaims any
liability for consequential or incidental damages of any
kind, including lost profits. The discussion herein of
various processes or compositions is not to be interpreted as
representation that they are free from domination of patents
owned by others or as a license under any Henkel
Corporation patents that may cover such processes or
compositions. We recommend that each prospective user
test his proposed application before repetitive use, using this
data as a guide. This product may be covered by one or
more United States or foreign patents or patent applications.
Trademark usage
Except as otherwise noted, all trademarks in this document
are trademarks of Henkel Corporation in the U.S. and
elsewhere. ® denotes a trademark registered in the U.S.
Patent and Trademark Office.
Reference 1.0